Honda Grom AC/DC headlight converter

* Those in the U.S. you will be notified by Stamps.com when your package has shipped out.

* If you require shipping to Canada or outside the U.S., please Contact us for a price quote.

2014/15 Honda Grom has an AC powered headlight from the factory.  Using this you will convert your AC headlight to DC as well as your tag light and give you the ability to use Led/Hid lighting for your headlights and maintain the factory bulb connection. 

The high beam indicator can be made to work properly for $20 in the add-on section.   We need your gauge cluster sent to us to complete the modification.

NOTE* those with Tyga or Yoshi tag lighting you will need to keep the yellow wire going back to the tag light attached to the factory plug.  These tag lights are AC powered only.

1: Remove Yellow connection from socket located behind the right fairing just behind the rear brake reservoir.

2: Insert the wire with spade connection on it into the yellow plug and cover with heat shrink to protect from shorting.

3: Using the  "NEW T tap connection" to connect other end of the jumper wire to the "Black" wire on the motorcycle side of the 3 pin connection that the taillight connects to.

To connect remove the grey/black end cap and place the black wire in the "U" channel and then tighten down the connection.  The point inside will pierce the wire and make a connection.  No cutting or tape needed. 

The picture below shows which wire you need to connect to if you cannot see the black wire on the motorcycle side of the plug.  If you view the orientation of the plug you will tap into the blue wire on this taillight shown.