This is for Filament bulbs only. This will not work with HID'S
Universal has wires only. Needs to be wired in to install.
Partial Plug n Play comes with 2 plugs to install to the low beam headlight and posi-tap to attach output wire to the High beam +.
Complete Plug n Play is completely plug n play for the model listed.
For plug n play We are sending the unit with the plugs off the module for the bike side connections. We have found that some bikes wiring is switched from others. Easy to do just match the green wire from "bike" to the black wire from the "module" Push the black wire pins into the plugs until you hear them click, they will only go in one way and click, force is not needed.
This is our new Dual headlight module that will give those with single low and single high beam the ability to have dual low beams and keep the factory high beam intensity when you hit your high beam switch. Universal option has 3 wire connection. +/- connection to the low beam and an output + to the High beam. We will get more plugs as we see more of a demand for certain types of bikes. If you would like the plug n play version and don't see your bike listed please contact us and let us know year/model bike and send some pictures so we can find the plugs needed.
Wiring Universal dual headlight module: *NOTE: High beam wire can be red,white or green. Single wire that is substantially longer than the other wires is your high beam + wire.
The rotary switch on the unit has 10 positions. The 12 'oclock position is full bright, position 0 the light is off . The settings move clockwise from 0 to 9 as follows:
0 = 100%
1 = 10%
2 = 20%
3 = 30%
4 = 40%
5 = 50%
6 = 60%
7 = 70%
8 = 80%
9 = 90%
Showing plug n play install. NOTE controller box is on low beam side, Long "WHITE,green,red wire" goes to High beam side